Хостинг - Обзор: эпицентр русскоязычного хостинга

Здравствуйте, гость ( Вход | Регистрация )

> Правила раздела

Настоящие Правила Раздела являются дополннением к Общим Правилам Конференции. В случаях противоречий отдельных пунктов, действуют Правила Раздела.

Запрещается

  1. Обсуждение хостинговых компаний и качества предоставляемых ими услуг.
  2. Реклама и антиреклама услуг хостинговых компаний.
  3. Навязывание собственных услуг в любом виде.
    Участникам Клуба хостинг-провайдеров разрешено давать ссылки на профайл своей компании в каталоге хостинга только в случае явного запроса услуг потенциальным клиентом. При поиске автором темы уникальных или специфических услуг, не описанных в каталоге хостинга, допускается информирование клиента о предоставлении таковых только персонально в личных сообщениях или с использованием другой контактной информации из профайла автора темы.

> Вопрос по apache
casper
сообщение 29.09.2010, 10:39
Сообщение #1





Группа: Старые пользователи
Сообщений: 425
Регистрация: 02.09.2005
Из: Самара
Пользователь №: 1,579


Репутация: 215


не подскажете настройки.
в общем впс. дебиан. 1000 оперативки
top показывает 600 -700 м. свободно оперативки.
места 2,5 гига свободно.
но периодически раз в 2 дня . приходится перезагружать. тк. в ssh не пускает.
какой командой в конфигурации апатча можно ограничить чтобы сайт не всю оперативку сьедал. ?
и сколько лучше включать серверов мин. макс.
на грузка сайта 1000-2000 уникалов в сутки.
кто нибудь с таким сталкивался?
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
 
Reply to this topicStart new topic
Ответов(1 - 5)
lazutov
сообщение 29.09.2010, 12:13
Сообщение #2


Графоман раздела претензий


Группа: Старые пользователи
Сообщений: 1,139
Регистрация: 21.06.2007
Из: MOW
Пользователь №: 5,748


Репутация: 230


Поставьте мониторинг, напр. munin и покажите графики нагрузки, может это и не апач.
Код
cat /proc/user_beancounters

Если OpеnVZ, покажите лимиты этой командой.
Если приходится перезапускать часто - добавьте в крон, у меня так было, когда у провайдера по-идиотски были лимиты выставлены.
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
cvss
сообщение 29.09.2010, 12:24
Сообщение #3





Группа: Старые пользователи
Сообщений: 14
Регистрация: 27.03.2009
Пользователь №: 9,270


Репутация: 191


Вероятно, боты на сервер нападают и память кончается
В конфиге апача поставьте параметр MaxClients 50, тогда вместо полного падения будет просто тормозить при большом числе посетителей.

User is offlineProfile CardPM
Go to the top of the page
+Quote Post
casper
сообщение 29.09.2010, 14:10
Сообщение #4





Группа: Старые пользователи
Сообщений: 425
Регистрация: 02.09.2005
Из: Самара
Пользователь №: 1,579


Репутация: 215


Version: 2.5
uid resource held maxheld barrier limit failcnt
43: kmemsize 3117309 16779168 16777216 16777216 2197955
lockedpages 0 410 4096 4096 0
privvmpages 59865 203250 262144 262144 0
shmpages 640 1041 131072 131072 0
dummy 0 0 0 0 0
numproc 39 169 400 400 0
physpages 9583 120533 0 2147483647 0
vmguarpages 0 0 262144 2147483647 0
oomguarpages 9583 120533 262144 2147483647 0
numtcpsock 16 192 500 500 0
numflock 4 73 200 200 0
numpty 2 2 64 64 0
numsiginfo 0 155 512 512 0
tcpsndbuf 154560 1216320 4194304 6291456 0
tcprcvbuf 262144 1116928 4194304 6291456 0
othersockbuf 76160 1321536 4194304 6291456 0
dgramrcvbuf 0 10816 524288 524288 0
vmguarpages 0 0 262144 2147483647 0
oomguarpages 9583 120533 262144 2147483647 0
numtcpsock 16 192 500 500 0
numflock 4 73 200 200 0
numpty 2 2 64 64 0
numsiginfo 0 155 512 512 0
tcpsndbuf 154560 1216320 4194304 6291456 0
tcprcvbuf 262144 1116928 4194304 6291456 0
othersockbuf 76160 1321536 4194304 6291456 0
dgramrcvbuf 0 10816 524288 524288 0
numothersock 38 176 500 500 0
dcachesize 217710 421088 4194304 4194304 0
numfile 1007 2207 8192 8192 0
dummy 0 0 0 0 0
dummy 0 0 0 0 0
dummy 0 0 0 0 0
numiptent 10 10 64 64 0

Аппатч


### Section 1: Global Environment

ServerRoot "/etc/apache2"

#
# The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
#
#<IfModule !mpm_winnt.c>
#<IfModule !mpm_netware.c>
LockFile /var/lock/apache2/accept.lock
#</IfModule>
#</IfModule>

#
# PidFile: The file in which the server should record its process
# identification number when it starts.
# This needs to be set in /etc/apache2/envvars
#
PidFile ${APACHE_PID_FILE}

#
# Timeout: The number of seconds before receives and sends time out.
#
Timeout 300

#
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
#
KeepAlive off

#
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
#
MaxKeepAliveRequests 100

#
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
#
KeepAliveTimeout 15

# resource limit
#RLimitMEM 838860 838860
##
## Server-Pool Size Regulation (MPM specific)
##

# prefork MPM
# StartServers: number of server processes to start
# MinSpareServers: minimum number of server processes which are kept spare
# MaxSpareServers: maximum number of server processes which are kept spare
# MaxClients: maximum number of server processes allowed to start
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_prefork_module>
StartServers 5
MinSpareServers 2
MaxSpareServers 10
MaxClients 50
MaxRequestsPerChild 500
</IfModule>

# worker MPM
# StartServers: initial number of server processes to start
# MaxClients: maximum number of simultaneous client connections
# MinSpareThreads: minimum number of worker threads which are kept spare
# MaxSpareThreads: maximum number of worker threads which are kept spare
# ThreadsPerChild: constant number of worker threads in each server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_worker_module>
StartServers 5
MaxClients 50
MinSpareThreads 2
MaxSpareThreads 10
ThreadsPerChild 25
MaxRequestsPerChild 500
</IfModule>

# These need to be set in /etc/apache2/envvars
User ${APACHE_RUN_USER}
Group ${APACHE_RUN_GROUP}

#
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives. See also the AllowOverride
# directive.
#

AccessFileName .htaccess

#
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
#
<Files ~ "^\.ht">
Order allow,deny
Deny from all
</Files>

#
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
#
DefaultType text/plain


#
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
#
HostnameLookups Off

# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog /var/log/apache2/error.log

##
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel crit

# Include module configuration:
Include /etc/apache2/mods-enabled/*.load
Include /etc/apache2/mods-enabled/*.conf

# Include all the user configurations:
Include /etc/apache2/httpd.conf

# Include ports listing
Include /etc/apache2/ports.conf

#
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
# If you are behind a reverse proxy, you might want to change %h into %{X-Forwarded-For}i
#
LogFormat "%v:%p %h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent

#
# Define an access log for VirtualHosts that don't define their own logfile
CustomLog /var/log/apache2/other_vhosts_access.log vhost_combined

#
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
#
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
#

#
# Putting this all together, we can internationalize error responses.
#
# We use Alias to redirect any /error/HTTP_<error>.html.var response to
# our collection of by-error message multi-language collections. We use
# includes to substitute the appropriate text.
#
# You can modify the messages' appearance without changing any of the
# default HTTP_<error>.html.var files by adding the line:
#
# Alias /error/include/ "/your/include/path/"
#
# which allows you to create your own set of files by starting with the
# /usr/share/apache2/error/include/ files and copying them to /your/include/path/,
# even on a per-VirtualHost basis. The default include files will display
# your Apache version number and your ServerAdmin email address regardless
# of the setting of ServerSignature.
#
# The internationalized error documents require mod_alias, mod_include
# and mod_negotiation. To activate them, uncomment the following 30 lines.

# Alias /error/ "/usr/share/apache2/error/"
#
# <Directory "/usr/share/apache2/error">
# AllowOverride None
# Options IncludesNoExec
# AddOutputFilter Includes html
# AddHandler type-map var
# Order allow,deny
# Allow from all
# LanguagePriority en cs de es fr it nl sv pt-br ro
# ForceLanguagePriority Prefer Fallback
# </Directory>
#
# ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var
# ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var
# ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var
# ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var
# ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var
# ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var
# ErrorDocument 410 /error/HTTP_GONE.html.var
# ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var
# ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var
# ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var
# ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var
# ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var
# ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var
# ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var
# ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var
# ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var
# ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var



# Include of directories ignores editors' and dpkg's backup files,
# see README.Debian for details.

# Include generic snippets of statements
Include /etc/apache2/conf.d/

# Include the virtual host configurations:
Include /etc/apache2/sites-enabled/

#NameVirtualHost *:443
#<VirtualHost _default_:443>
# ServerName www.example.com:443
# SSLEngine on
# SSLCertificateFile /etc/apache2/ssl.crt/server.crt
# SSLCertificateKeyFile /etc/apache2/ssl.key/server.key
#</VirtualHost>

Include /usr/local/ispmgr/etc/ispmgr.inc
<Directory /var/www/s/data/www/s.ru>
php_admin_value open_basedir "/var/www/s/data:."
Options +ExecCGI +Includes
</Directory>

#NameVirtualHost 7.1.7.2:80
#NameVirtualHost 7.1.7.1:443
NameVirtualHost 7.1.7.1:443
NameVirtualHost 7.1.7.1:80
<VirtualHost s.ru:80>
ServerName s.ru
DocumentRoot /var/www/s/data/www/s.ru
SuexecUserGroup s s
CustomLog /var/www/httpd-logs/s.ru.access.log combined
ErrorLog /var/www/httpd-logs/s.ru.error.log
ServerAlias www.s.ru
ServerAdmin admin@bo.net
ScriptAlias /cgi-bin/ /var/www/s/data/www/s.ru/cgi-bin/
php_admin_value open_basedir "/var/www/s/data:."
php_admin_value sendmail_path "/usr/sbin/sendmail -t -i -f admin@bo.net"
php_admin_value upload_tmp_dir "/var/www/s/data/mod-tmp"
php_admin_value session.save_path "/var/www/s/data/mod-tmp"
php_admin_value safe_mode "on"
# php_admin_value memory_limit "419430400"
AddType application/x-httpd-php .php .php3 .php4 .php5 .phtml
AddType application/x-httpd-php-source .phps
# RLimitMEM 419430
</VirtualHost>
<VirtualHost 79.174.79.231:443>
ServerName s.ru
DocumentRoot /var/www/s/data/www/s.ru
SuexecUserGroup s s
CustomLog /var/www/httpd-logs/s.ru.access.log combined
ErrorLog /var/www/httpd-logs/s.ru.error.log
SSLEngine on
SetEnvIf User-Agent ".*MSIE.*" nokeepalive ssl-unclean-shutdown downgrade-1.0 force-response-1.0
SSLCertificateFile /var/www/httpd-cert/s.ru.crt
SSLCertificateKeyFile /var/www/httpd-cert/s.ru.key
ServerAlias www.s.ru
ServerAdmin admin@b0.net
php_admin_value open_basedir "/var/www/s/data:."
php_admin_value safe_mode "on"
php_admin_value sendmail_path "/usr/sbin/sendmail -t -i -f admin@bo.net"
php_admin_value session.save_path "/var/www/s/data/mod-tmp"
php_admin_value upload_tmp_dir "/var/www/s/data/mod-tmp"
# php_admin_value memory_limit "419430400"
AddType application/x-httpd-php .php .php3 .php4 .php5 .phtml
AddType application/x-httpd-php-source .phps
ScriptAlias /cgi-bin/ /var/www/s/data/www/s.ru/cgi-bin/
# RLimitMEM 419430
</VirtualHost>


User is offlineProfile CardPM
Go to the top of the page
+Quote Post
pip
сообщение 29.09.2010, 22:57
Сообщение #5





Группа: Старые пользователи
Сообщений: 79
Регистрация: 07.04.2008
Из: Boston, MA
Пользователь №: 7,292


Репутация: 201


kmemsize отказов у вас слишком много - 2197955, так как значение kmemsize для тарифа в 1024 мб слишком маленькое.
Если сервер только под ваши нужды, то поставьте неограниченное значение, а если не под ваши, то 50000000+ ставьте.
Вот пример конфигурации ubc для тарифа 1024мб (честные ресурсы) http://wiki.vdsplanet.ru/VDS_Jupiter_UBC_parameters

Сообщение отредактировал pip - 29.09.2010, 23:05
User is offlineProfile CardPM
Go to the top of the page
+Quote Post
Viktorich
сообщение 30.09.2010, 08:24
Сообщение #6





Группа: Старые пользователи
Сообщений: 37
Регистрация: 21.10.2008
Пользователь №: 8,274


Репутация: 195


mod_php для такой посещалки, рас у вас ещё и съедает всю память, невиданная роскошь. Советую перейти на php as fcgi и апач сменить на mpm_worker
User is offlineProfile CardPM
Go to the top of the page
+Quote Post

Reply to this topicStart new topic
1 чел. читают эту тему (гостей: 1, скрытых пользователей: 0)
Пользователей: 0

 



- Текстовая версия Сейчас: 29.03.2024, 13:07
Яндекс.Метрика